No products in the cart.
- Higher Capacity BottleLess Cooler
- Extra Large 2.5 Gallon Cold Tank
- 6.5 Liters Of Steaming Water Per Hour
- Our tallest cooler – 44 Inches tall
- Instant Cold Water No-Touch Faucet
- Instant Hot Water Child-Resistant Faucet
- 100% Stainless Steel Cold & Hot Tanks
- 1,200 Gal. Water Purification System
The High Capacity Standing Stainless Steel Cabinet BottleLess (POU) Cooler From XO Water: MJ1-SST
The Everest BottleLess water cooler (sometimes called a “point of use” cooler) is for customers who want a cooler that stores and produces a higher volume of cold and hot water. It’s also perfect for offices, warehouses, factories, waiting rooms, gyms, waiting rooms – and homes who want a cooler where the faucets are taller. The Everest MJ1-SST cooler has a high volume stainless steel water tank incomes with everything you need for pure, delicious water – our high capacity Twist-Off water purification system, installation kit, and step-by-step instructions. The coolers use a standard electrical outlet and are perfect for typical usage of up to 40+ people.
Instant Cold Water – And A Lot Of It
The Everest is our highest capacity cooler with a 2.5 gallon, stainless steel cold water tank reservoir. After the water is purified, it is stored inside this internal, sealed reservoir. This cooler is great for busy lobbies or offices with lots of people.
The COLD water is dispensed at the perfect temperature to cool you off on a hot day or after a workout – between 40 and 44 degrees. The cold water has an adjustable thermostat to change the cold water temperature to your liking.
Instant Hot Water, Too
The Everest produces steaming hot water great for tea, hot chocolate, soups and instant oatmeal. It can produce 6.5 liters of hot water per hour.
The hot faucet is child-resistant. It requires a two-step action that’s easy for adults to use, but helps protect small children. The hot water function can also be turned off if your cooler if you want to conserve electricity.
Sealed Stainless Steel Reservoirs
Inside XO Water BottleLess Coolers, there are 2 sealed, 100% stainless steel reservoirs – one holds your cold water and the other holds your steaming hot water. Your water will cold/hot faster because it’s so much more energy efficient to chill and heat your water through stainless steel (as opposed to plastic reservoirs – which our competitors use). This efficiency has earned us Energy Star Certification!
Stainless internal components also allows your cooler to last for years. Our reservoirs refill as you drink water.
The exterior cabinet of our Everest stainless steel cabinet bottleLess cooler is made of hard ABS front and top – and stainless steel sides. The cooler is designed to complement any style home or office. The MJ1-SST measures 44″ inches high x 11.4″ inches wide x 14.4″ inches deep. The shock absorbing base on all of our coolers is made of ABS plastic which will never rust. The drip tray lifts out and is dishwasher safe.
UL & Energy Star Certified
Our coolers are made to the highest standards and specifications. This has earned our cooler both UL certification as well as Energy Star. The coolers are equipped with a top quality, quiet 1.7A compressor. All components are lead free as defined by the Safe Drinking Water Act, and the Lead Free Contamination Control Act. The coolers use only 1.2 Kwh/Day. It is 7.7 Amps, 110 Volts .
The Ultimate In Water Filtration
Our Twist-Off purification is included with your XO BottleLess Water Cooler. It’s the ultimate in “user friendly” water filtration. This 1-micron filtration system is independently certified for 1,200 gallons for chlorine, lead, cysts, bad taste and odor reduction. That’s the same amount of water as 240 of those big 5-Gallon bottles! This filter has been independently tested to NSF Performance Standard 42 and Standard 53. Replacement of the filter cartridge is completed in seconds. Just remove the filter cartridge from the permanent head with a twist of your wrist. The new filter cartridge is just as easily replaced by threading it into the head and twisting the other direction. The Twist-Off system automatically shuts off the supply water when the cartridge is turned. No drips. No hassles.
The Included Installation & Set Up Kit
The kit includes a lead-free stainless steel saddle valve and 25′ feet of food-grade, flexible ¼” waterway. It also includes step-by-step instructions as well as online videos to make sure everything goes well. Remember: we’re here to help.
Your cooler includes tech support phone support if you have any questions.
|Dimensions||11 x 14 x 45 in|